Hartmetall-Stangenschneidemaschine

Plasma metal cutting machine

Features:

1. The frame adopts all-welded structure, which is firm and reasonable, easy to operate and durable.

2. Cutting speed and high precision. The stainless steel plate is cut without black edges and no dross. The cutting mouth is small, neat and has no slag. On the basis of the traditional numerical control system, the control method for cutting is improved, and the secondary dressing processing is avoided.

3. Applicable to metal plates such as steel plates, copper plates, iron plates, aluminum plates, galvanized sheets, and titanium plates.

4. The CNC system configuration is high. Automatic arc ignition, stable performance, the success rate of arc ignition is more than 99%.

CNC flame plasma cutting machine, this model has beautiful appearance/low center of gravity/stable operation. It can be used with various CNC systems at home and abroad. It can also be equipped with any type of plasma cutting system to cut within the effective cutting range.

Beam / end frame

The beam adopts square tube welded structure, and the overall rigidity is good/high strength. Each guiding surface is precision machined to ensure the correct positioning of each moving body.

The unit drive of the two ends adopts the pull-open three-point positioning, the bilateral drive adopts symmetrical processing, and the center is stable, which ensures a good dynamic balance.

All welded parts are stress-treated to effectively prevent structural deformation.

Guide

The longitudinal guide rail is made of high-strength linear guide rail, and the top surface and both sides are precision machined by special grinding machine.

The horizontal guide rail adopts a double-axis linear guide rail with high precision/easy maintenance/durability.

Transmission

The longitudinal and transverse transmissions are meshed with gear racks and equipped with imported precision gear reduction gearboxes, featuring high output torque/low noise/long life lubrication, thus achieving high-density precision positioning transmission.

Drag Chain

All gas lines are centrally controlled by the central gas distribution system, equipped with a solenoid valve / pressure gauge / air regulator / continuous pulse automatic igniter, easy to achieve artificial intelligence control.

Cutting Torch

The torch assembly consists of a moving seat/lifting device/motor/torch/gas valve/tempering preventer/soft air pipe. The torch height adjustment mode has three options: manual/electric and automatic. When it is automatic, the torch will automatically adjust to ensure the cutting quality with the height of the steel plate.